TM 6 EG-EA-2 hp Set-Up/Four Spline

- P.N. FS-113, 2 hp, 115 ⁄ 230 Volt, 3450 rpm, Changeover Switch 60 Hz, Single-Phase, AC Electric Motor

- P.N. 3927, Three Caster Swiveling Tripod Motor Mount With Carrying Handle

- P.N. 32952A, 7', Flexible Shaft, 4 Spline

- P.N. 57143A, 7', Flexible Housing

- P.N. 56934 (Or 31151B), Wet Angle Head, 4 Spline, 1:1 Ratio

TM 3 EG-EA-1 1/2 hp Set-Up/Four Spline

- P .N. FS-102, 1½ hp, 115 ⁄ 230 Changeover Switch, 3450 rpm 60 Hz, Single-Phase, AC Electric Motor

- P.N. 3927, Three Caster Swiveling Tripod Motor Mount With Carrying Handle

- P.N. 32952A, 7', Flexible Shaft, 4 Spline

- P.N. 57143A, 7', Flexible Housing

- P.N. 56934 (Or 31151B), Wet Angle Head, 4 Spline, 1:1 Ratio

Terrco Angle Spindles

- Dry Spindle
Precision ball bearing mounted spindles available in 4 speed ratios (1:1, 2:1, 4:1 and 10:1). Dry spindles for sanding, polishing and buffing.

Wet Spindle
Precision ball bearing mounted spindles available in 4 speed ratios (1:1, 2:1, 4:1 and 10:1). Wet spindles for sanding, polishing and buffing.

Dry Guard for Angle Spindle

- Angle Heads: 5"

Four Spindle

- Full speed heavy duty straight spindle. Mounted with long life ball bearings. Designed for grinding, sanding, wire brushing, polishing and buffing.

Dry Spindle

- For dry cove base work. Ball bearing construction throughout. Light weight aluminum alloy housing.

Wet Spindle

- For wet cove base work. Ball bearing construction throughout. Petcock type inlet valve for position flow control: anti-splash apron.

Flexible Shaft Adapter

- Adapter for backer pad

- Available in 1/2" - 5/8"

Backer Pads

- Rigid - Available in 4" & 5"

- Semi Flexible Backplate - Available in 3, 4, 5 & 7"

- Flexible - Avialable in 4" & 5"

Jepson Die Grinder

- Used with Type A2 & Type A4 Mounted Wheels

- For hard to reach areas to grind

TM Full Face Polishing Pads

- Works wet or dry

- For use with any variable speed grinder

- 5" - 7" pads available in 35, 50, 100, 200, 400, 800 & 1500 grit

Genesis Discs

- 3", 5" & 7" Discs

- Available in 50, 70, 120, 220, 400, 600N, 600, 800, 1800, & 3500 Grit

FW - 62

- 5 1/2" x 2" x 3/4" Vitrified

- Grit: 24-80-120

FR - 594

- 2 1/4" x 2 1/2" Vitrified

- Grit: 24-80-120

FR - 594 Radiac Type

- 3" x 2 1/2" x 1" Vitrified

- Grit: 24-80-120

FR - 600

- 3" x 2 1/2" x 1" Vitrified

- Grit: 24-80-120

FW - 22

- 5 1/2" x 2" x 5/8" Vitrified

- Grit: 24-80-120

FW - 26

- 6" x 2" x 3/4" Vitrified

- Grit: 24-80

FW - 33

- 4 1/2" x 2" x 3/4" Vitrified

- Grit: 24-80

FW - 321

- 3" x 4" x 3/4" Vitrified

- Grit: 24-80-120

FW - 220R

- 3" x 5" x 1/2" Vitrified

- Grit: 24-80

FW - 250R

- 3" x 5" x 1/2" Vitrified

- Grit: 24-36-80-120

Type A2

- 1" x 1 1/4" Resinoid

- Grit: 36

Type A4

- 1" x 1 1/4" Resinoid

- Grit: 36

Brazed Diamond Cove Wheel

- Radiused edge polishes cove on epoxy and portland based terrazzo
- Available in 3/4" and 1" radius

- 25/35 and 80/100 Grits available

- Water opening in face for even water distribution to work surface

Site Materials

About T&M

Terrazzo

Natural Stone

Quartz & Porcelain

Sustainability

Specialty Plaster

View Materials

TERRAZZO EDGE & BOARDER MACHINES

T&M's collection of terrazzo edge polishers & terrazzo border machines allow for the polishing of terrazzo floors in those hard to reach places that a normal floor machine can't get to. These are good for polishing corners, edges and borders. Border machines can be attached to cove base grinding stones for polishing poured in place cove bases also.

Base Machinery
TM 6 EG-EA-2 hp Set-Up/Four Spline	TM 3 EG-EA-1 1/2 hp Set-Up/Four Spline	Jepson Die Grinder
Base Machine Accessories
Terrco Angle Spindles	Dry Guard for Angle Spindle	Four Spindle	Dry Spindle	Wet Spindle	Flexible Shaft Adapter	Backer Pads
Dresser Wheel Handle	Dresser Wheels
Abrasives
TM Full Face Polishing Pads	Genesis Pads	5" Diamond Cup Wheel	7" Diamond Cup Wheel	Brazed Diamond Cove Wheel
Grinding Stones
FW-62	FW-22	FW-26	FW-33	FW-321
FW-220R	FW-250R	Type A2	Type A4